KEYENCE Introduces the MK-R1000, a Continuous Inkjet Printer Engineered to Stay on the Line
Sixth-generation CIJ printer is built on three promises: a printer that never leaves the production line, perfect codes every time, and fast recovery if something goes wrong.
www.keyence.com

KEYENCE Corporation of America this week introduced the MK-R1000 series, its sixth-generation continuous inkjet (CIJ) printer, built around a simple idea: “On the Line. By Design.” It features MK Clean In Place, the world’s first system for cleaning a CIJ print head without removing it from the production line; self-troubleshooting capabilities that diagnose problems and perform corrective actions on their own; and the industry’s first Head Core Module, which can be swapped in minutes. The MK-R1000 is designed for manufacturers in the food and beverage, pharmaceutical, personal care and cosmetics, chemical, building materials, and wire and cable industries.
On many production lines, the coder is one of the most frequent reasons the line stops. The crew is in, but the coder won’t start, and the day falls behind. Over multiple runs, ink builds up on the print head until code quality degrades and the printer faults out. Attempts to correct this mean pulling the head off the line, cleaning it, then reinstalling and test-printing it. When a fault won’t clear, setting up a spare printer can take 45 minutes or more. Without one, the line can sit for days waiting on a technician, and shipments are missed. The MK-R1000 is engineered to prevent these problems and stay on the line, and when something does go wrong, to recover in 15 minutes or less.
Never leaves the production line. MK Clean In Place cleans the print head directly on the line in any orientation with high-pressure solvent jets. Scheduled cleaning during changeovers removes buildup before it becomes a fault. Daily startup is fully optimized with Inline Startup. With one button, it performs self-diagnosis, automatically determines the fastest startup method, and executes the appropriate procedures while the head remains installed on the production line. By adapting to the printer’s current condition, it reduces unnecessary maintenance and gets the printer up and running in minutes.
Perfect codes every time. Most CIJ printers sit 10 to 15 mm from the product, close enough for ink to splash back onto the head. The MK-R1000 prints from 35 mm (1.38") away as standard, 2.3 times the distance of the previous model, so splashback buildup never gets started. Adaptive Long Distance Printing builds on machine-learning analysis of more than 10 million real-world print patterns from previous MK-series printers. On every print, it applies the exact voltage correction each droplet needs so it doesn’t collide with, or pick up charge from, the droplets around it, at any line speed, print distance, character height, or message. No splashback, no dirty print head, just sharp, high-quality codes every time.
Fast recovery. The MK-R1000 is built to recover well within 15 minutes, the point at which most lines would reach for a spare printer. If an issue occurs, operators simply place the head in the MK Dock 2 and run Quick Recovery. The printer quickly identifies the problem, goes through a condensed series of troubleshooting steps, and performs a full-system recovery with no specialized product knowledge or skills required. Most issues are resolved and the line is back up and running in minutes. For tougher faults, downtime stays within the plant’s control: operators can swap the Head Core Module, which houses the head’s critical components, and keep production running.
“Manufacturers want a coder that runs. They buy it so every product gets a readable code, and then they want to set it and forget it,” said Chet Vonghiran, Strategic Product Specialist, KEYENCE Corporation of America. “In practice, the coder is often what they think about most, because it needs cleaning regularly and it stops the line when it faults out. The MK-R1000 keeps printing while it handles its own cleaning, preventative maintenance, and even troubleshooting right on the production line, so operators can be hands-off with the coder and focus on more important work.”
Built for the Plant Floor
The stainless steel controller and print head are both IP66-rated for dust and water resistance. An optional Backup Module keeps the printer running through momentary power failures of up to 2 seconds and performs an automatic cleaning and shutdown during longer outages to keep the ink lines from clogging. Operation is effortless. Step-by-step on-screen videos guide operators through every task, from initial setup to parts replacement, so even first-time operators can complete any task correctly and confidently.

“Every customer we talked to told us the same thing: unplanned downtime costs far more than the printer,” said Jeff Johnson, Executive Director, KEYENCE Corporation of America. “So we designed the MK-R1000 around one question: how do we keep it on the line and printing? Every aspect of its design is an answer to that question.”
Availability
The MK-R1000 series is available now in the United States. Customers can request pricing, an in-plant demonstration, or a free trial unit by visiting https://www.keyence.com/products/marker/inkjet-printers/mk-r1000/ or by calling their local KEYENCE sales representative at 1-888-539-3623.

