MAX TAPENER : HT-S45E STRONG BIND MODEL
Cut Apple Tree Training Time with the MAX HT-S45E Strong Bind Model.
www.max-ltd.co.jp
A practical alternative to repetitive hand tying in trellis-grown apple orchards.
Training and securing branches to trellis wires is essential in modern apple orchards, yet the work is often performed by hand. Each branch must be positioned and tied individually. While a single tie may take only a few seconds, repeating the process thousands of times can add significant labor costs. The MAX HT-S45E Strong Bind Model is designed to speed up this repetitive task while providing the secure hold needed for branch training.
Manual tying takes time
The photos below show the type of green hand tying used to secure a branch to a trellis wire or support. The method is simple and reliable, but the operator must handle the tape, wrap the branch and make the knot for every tie. During a large training job, this repeated hand work can become a substantial part of the crew's day.

Fig. 1 Example of conventional green hand tying on an apple branch.
What changes with the HT-S45E?
The HT-S45E is a battery-powered, one-handed tying tool developed for strong orchard training applications. The operator positions the branch against the wire, closes the tool around the branch and wire, and completes the tie in one action. In MAX testing, the working time used for the comparison was 7 seconds per tie for hand tying versus 2 seconds per tie with the HT-S45E. The benefit is not only a faster single tie, but a large reduction in accumulated labor time over hundreds or thousands of ties.
5-acre work and cost simulation
The following simulation uses a 5-acre orchard with approximately 2,000 trees and 12,000 ties in total. It assumes one operator, six ties per tree and a labor rate of $20 per hour. The figures illustrate how a small difference in working time per tie can translate into a much larger difference at orchard scale.

Under these assumptions, total cost falls from $479 to $301, a reduction of $178 (about 37%), while total labor time falls from 23 hours to 7 hours.

Fig. 3 Original 5-acre calculation sheet and comparison chart (reference data).
Tool and consumables
The system consists of the HT-S45E tool, dedicated fiber-reinforced tying tape and MAX tying staples. The tool is designed for one-handed operation so the user can hold or position the branch with the other hand. Because the tape and staple are dedicated components, the tying action can be repeated quickly and consistently while providing the restraint required for trellis training.



Fig. 4 HT-S45E Strong Bind Model and dedicated tape / staple consumables.
Why can the tie hold strongly?
The key difference from ordinary PVC tape is the construction of the dedicated tape. Fibers are embedded in the tape to increase rigidity and reinforcement, and the tape is fastened with a dedicated strong-hold staple. According to MAX specifications, the resulting tie can withstand a load of up to 22 lb(10 kg) and is suitable for applications requiring holding periods of approximately two to three years. This combination is designed to provide the firm restraint growers expect from conventional green hand tying while reducing the time needed to complete each tie.


Fig. 5 Fiber-reinforced tape construction and strong-hold concept.
See the HT-S45E at Northwest Hort Expo
Growers who would like to see the tool and understand how it could fit their own training method are invited to visit MAX and LeCooke Supply at this year's Northwest Hort Expo, December 7-9, 2026. The actual tool, tying method and consumables can be demonstrated at the show. For product questions, availability or further information, please contact LeCooke Supply.
2026 WSTFA Annual Meeting & NW Hort Expo December 7–9
Three Rivers Convention Center Kennewick, Washington
LECOOKE Supply – Booth 619
Interested in learning more about the MAX HT-S45E?

For product information, availability, or questions about how the HT-S45E can be used in your orchard, please contact LeCooke Supply.
Scan the QR code to get in touch.
Or email Davey at This email address is being protected from spambots. You need JavaScript enabled to view it.
Product inquiries: https://www.lecookesupply.com/

